R-Drive Image is a great tool for creating disk image files and backing up data. A disk image file containing an exact "byte for byte" copy of a hard disk, partition, or logical drive can be created without rebooting the computer and with various levels of data compression. The created disk image can be saved on various types of media, including removable media such as CD-R(W)/DVD, Iomega Zip and Jazz discs.



R-Drive Image is a great tool for creating disk image files and backing up data. A disk image file containing an exact "byte for byte" copy of a hard disk, partition, or logical drive can be created without rebooting the computer and with various levels of data compression. The created disk image can be saved on various types of media, including removable media such as CD-R(W)/DVD, Iomega Zip and Jazz discs.

R-Drive Image Technician restores a disk image to the original disk, to another partition, or to free unformatted disk space without rebooting the system. To restore a system or locked partition, R-Drive Image switches to pseudographic mode directly from Windows or starts the bootable version of the program from a CD or a set of floppy disks. Using R-Drive Image, you can quickly and completely restore the system after a total data loss caused by a system crash, virus attack or computer hardware failure.

You can also use R-Drive Image Technician for mass system cloning in cases where you need to install one already configured system on several identical computers. In other words, you can manually configure one system, create an image of it, and then deploy that image to other identical computers, saving time and money. If only a few files need to be restored, the disk image can be attached as a virtual disk; data from it, i.e. directly from a disk image, easily copied using Windows Explorer or other file utilities.

Opportunities:
- Simple and convenient user interface - no in-depth knowledge of computer management is required.
- Perform operations "on the fly": Disk images are created without the need to stop and restart the Windows operating system. During the imaging process and until completion, all other write operations are stored in the cache. Image recovery is also carried out "on the fly" with the exception of the system partition. When restoring the system partition, it is necessary to reload the program into pseudo-graphical mode directly from Windows or using pre-created boot disks (CD/DVD or floppy disks).

- Compressing image files. Image files can be compressed to save disk space.
- Support for removable media devices. Image files can be saved to removable media devices such as CD-R(W)/DVD, Iomega Zip and Jazz discs.
- Support for Microsoft networks. The bootable R-Drive Image CD/DVD version supports saving a disk image on a remote computer and restoring it from a remote computer to a local computer in Microsoft networks (CIFS protocol).
- Pseudographic mode. Reboot to pseudo-graphical mode, to restore to the system or any other locked partition is carried out directly from Windows. There is no need to use a bootable CD/DVD.
- Expanded list of supported devices. A large list of computer hardware components supported by the program.
- USB 2.0 supported in pseudo-graphics mode. While the cost of hard drives and removable drives is constantly decreasing, a removable USB 2.0 drive (flash drive) can be the most optimal and reliable solution for backing up system and other partitions in portable computers. No more need for unreliable CD/DVD and slow CD/DVD burners.
- Boot version. Special boot disks (two floppy disks or one CD/DVD) are created to restore to the system partition.
- Recovery of individual files and folders. The disk image can be mounted as a read-only virtual disk and its content can be viewed and copied.
- Separation of the image file. A disk image file can be divided into several files if there is not enough space to store it on one medium.
- Disk image protection. The image file can be password protected and contain additional comments.
- File system conversion. The file system of the recovered disk can be converted (eg FAT16 to FAT32 and vice versa).
- Creation of new sections. Disk image data can be restored to free disk space. The size of the restored partition can be changed.
- Replacing partitions. Disk image data can be restored to any existing partition. the program can delete the existing partition and restore the disk image to the freed space.
- Copying Disk to Disk. An entire disk can be copied to any other disk of the same or greater capacity.
- Checking the created image. The disk image file may be checked for correctness of its creation before it is saved and/or restored.
- Schedule. The task of creating a disk image can be installed and executed at a specific time in automatic mode.
- Creation of a script for frequent and automatic actions. The program interface allows you to create scripts to automatically create an image file and add data to an existing disk image file. Scripts are executed from the command line, and such a line can be included in any batch file.
- Notification of completed operations. the program automatically creates and sends an email notification, and can also launch an external utility when the disk image is successfully created or the image creation operation is not completed
- Support for Windows Vista and 64-bit processors. The new version of R-Drive Image supports all Windows Vista operating systems and 64-bit processors.

- Acceleration of disk imaging and copying operations. Added asynchronous I/O, distributed compression library zlib and other features. As a result, image creation and disk copy operations increased by up to 200 percent.
- Differential image creation mode. In differential mode, when creating a disk backup, it compares the current data with the 128-bit cache of the original data without reading the master image. In any case, this speeds up the process of creating an image, but it also does not need to change the source discs when burning the image to CD / DVD.
- Incremental image creation mode. A new incremental image creation mode has been added.
- The boot module can be burned to CD/DVD along with the image. It became possible to use a bootable CD / DVD disk for system recovery.

- Support for creating a backup copy of the volume using the Shadow Copy Service (Microsoft Volume Shadow Copy Service). When creating snapshots of a real-time database, Microsoft Exchange server, Microsoft SQL Oracle, etc. notified prior to copying. This technology allows you to synchronize server databases and make correct copies of rapidly changing data.

- Support for Dynamic Disks and BSD slices. Allows you to backup dynamic disks and BSD parts, save them and restore them.
This property is supported both in Windows and in the bootable CD version of R-Drive Image. You can create an image of any type of disk or partition and then restore that image back to a dynamic or regular disk. However, when restoring such an image, it is not possible to change the size or other properties of the disk to which the image is being restored. When a dynamic disk image is restored to a normal disk, the normal disk cannot be converted to dynamic.

- Flexible control of writing to CD/DVD. Allows you to limit the write speed and cache the ISO file.
- Improved disk image file format.
- Writing to NTFS partitions. The CD/DVD version of R-Drive Image (developed on the Linux kernel) supports writing to NTFS partitions in the same way as the Windows version of R-Drive Image does.

System Requirements :
- An Intel-compatible platform running Windows 11/10/8.1/8/7/Vista/XP/2000 Windows Server 2022/2019/2016/2012/2008/2003 (including 64 bits editions).
- The administrative privileges are required to install and run R-Drive Image.

What's new in version 7.0 Build 7000:
• A new, completely redesigned wizard interface with improved graphical controls, drag and drop object manipulations, and visual source and target binding.
• A partition manager that allows the user to delete, wipe, create, and re-size partitions and logical disks.
• Image creation from individual files, not only from disk objects.
• Advanced and versatile logs accessible directly from the user interface.
• Advanced file filtering to make search for files and marking them easier. File filters can be created directly on a R-Drive Image panel or set/edited manually (Batch mode).
• Support for rotation schemes (a further development of backup sets). A rotation scheme is a set of files (usually a file for a full image of an object and a number of its incremental/differential backups) which R-Drive Image treats as one unit. Rotation schemes are used to flexibly control the parameters of complex backup tasks. R-Drive Image supports predefined and custom rotation schemes. Custom rotation schemes are available in the Corporate, Technician, and Commercial licenses.
• Support for the VMDK file type, a popular virtual machine disk format (only in Corporate, Technician, and Commercial Licenses).

Build Information

Version features :
Type: installation, unpacking (Portable by TryRooM).
Languages: Russian, English, German (others deleted)
Treatment: (Original author TSZ/6201 author docenttmp).

What's New in R-Drive Image 7.0 Build 7001

https://forum.r-tt.com/viewtopic.php?t=5039

Platform: Windows 11/10/8.1/8/7/Vista/XP
Interface language: Multilanguage / Russian / English